Behringer EG2080-RW/BK Manuel D’Utilisation
10
EUROGRAND EG2080-
RW/BK
4. CONTROL ELEMENTS AND CONNECTIONS
4.1 Control panel
Fig. 4.1: Control elements of the EG2080
The control elements of the EG2080 are described below. To
give you a clear overview of the control panel, its elements have
been grouped in separate sections.
give you a clear overview of the control panel, its elements have
been grouped in separate sections.
MAIN VOLUME: Is used to adjust the volume of the built-
in loudspeakers, headphone outputs and LINE OUT 1/4"
TRS jacks.
in loudspeakers, headphone outputs and LINE OUT 1/4"
TRS jacks.
BRIGHTNESS: Varies the sound character from soft (left)
to bright (right).
to bright (right).
SPEAKERS: Switches the built-in loudspeakers on and
off. The MUTE LED lights up only when the built-in
loudspeakers are switched off. When you insert your
headphones this will automatically switch off the built-in
loudspeakers.
off. The MUTE LED lights up only when the built-in
loudspeakers are switched off. When you insert your
headphones this will automatically switch off the built-in
loudspeakers.
DEMO: Enables/disables DEMO mode.
METRONOME: Is used to start/stop the metronome click.
TRACK 1: Selects track 1 for playback or recording. The
REC LED lights up when the track has been activated for
recording. The PLAY LED lights up when the track has
been set for playback and already contains musical data.
REC LED lights up when the track has been activated for
recording. The PLAY LED lights up when the track has
been set for playback and already contains musical data.
TRACK 2: Selects track 2 for playback or recording. The
REC LED lights up when the track has been activated for
recording. The PLAY LED lights up when the track has
been set for playback and already contains musical data.
REC LED lights up when the track has been activated for
recording. The PLAY LED lights up when the track has
been set for playback and already contains musical data.
START/STOP: Is used to start/stop playback or recording
of the music sequencer.
of the music sequencer.
REC: Activates record mode.
SELECT: Selects the TEMPO parameter and menu pages
for EDIT mode. The EDIT MODE LED shows in EDIT mode,
the TEMPO LED in TEMPO mode.
for EDIT mode. The EDIT MODE LED shows in EDIT mode,
the TEMPO LED in TEMPO mode.
ef
: Depending on which mode you have selected with
the SELECT button, these two buttons can be used to
enter the tempo or to scroll through the EDIT mode menu
pages.
enter the tempo or to scroll through the EDIT mode menu
pages.
Display: Depending on the function used, the display
reads the tempo, menu numbers or parameter values.
reads the tempo, menu numbers or parameter values.
-/NO, +/YES: Is used to raise/lower the parameter values
shown in the display. Additionally, the +/YES button
executes certain EDIT functions.
shown in the display. Additionally, the +/YES button
executes certain EDIT functions.
SOUND SELECT: These 14 buttons are used for sound
selection. In DEMO mode they are used to select individual
sound color demos.
selection. In DEMO mode they are used to select individual
sound color demos.
REVERB: Selects one of four room effects (ROOM, HALL
1, HALL 2, STAGE) for the selected sound. An LED shows
which effect is currently active. If no LED lights up, no
room effect is active.
1, HALL 2, STAGE) for the selected sound. An LED shows
which effect is currently active. If no LED lights up, no
room effect is active.
4. CONTROL ELEMENTS AND CONNECTIONS