Korg Triton Studio Manuel D’Utilisation

Specifies the direction of change in “Start (Start Level)” 
caused by “AMS1 (Level Mod. AMS1).” If “Intensity 
(AMS1 Intensity)

” is a positive (+) value, a setting of + will 

raise the EG level, and a setting of – will decrease it. With a 
setting of 0 there will be no change.

Specifies the direction of change in “Attack (Attack Level)” 
caused by “AMS1 (Level Mod. AMS1).” If “Intensity (AMS1 
Intensity)” is a positive (+) value, a setting of + will raise the 
EG level, and a setting of – will decrease it. With a setting of 
0

 there will be no change.

Refer to the preceding paragraphs “AMS1 (Level Mod. 
AMS1)”–“At (AMS1 SW Attack).”

These parameters let you use an alternate modulation 
source to control the Time parameters of the pitch EG.

Selects the source that will control the Time parameters of 
the pitch EG (“AMS List” 

Specifies the depth and direction of the effect that “AMS 
(Time Mod. AMS)” will have.
With a setting of 0, the pitch EG times will be just as speci-
fied by the “Pitch EG” (2–3a) settings.
The alternate modulation value at the moment that the EG 
reaches each point will determine the actual value of the EG 
time that comes next.
For example, the decay time will be determined by the alter-
nate modulation value at the moment that the attack level is 
reached.
When this parameter is set to values of 16, 33, 49, 66, 82, or 
99

, the specified EG times will speed up as much as 2, 4, 8, 

16, 32, or 64 times respectively (or slowed down to 1/2, 1/4, 
1/8, 1/16, 1/32, or 1/64 of the original time).
For example if “AMS (Time Mod. AMS)” is set to Velocity, 
increasing the absolute value of “Intensity (AMS Intensity)” 
will allow strongly-played notes to increase the changes in 
pitch EG Time values. The direction of the change is speci-
fied by “At (AMS SW Attack)” and “Dc (AMS SW Decay).” 
As you play more softly, the pitch EG times will more 
closely approach the actual settings of the pitch EG.

Specifies the direction in which “AMS (Time Mod. AMS)” will 
affect the “Attack (Attack Time).” With positive (+) values of 
“Intensity (AMS Intensity),” a setting of + will cause the time 
to be lengthened, and a setting of – will cause the time to be 
shortened. With a setting of 0 there will be no change.

Specifies the direction in which “AMS (Time Mod. AMS)” 
will affect the “Decay (Decay Time).” With positive (+) val-
ues of “Intensity (AMS Intensity),” a setting of + will cause 
the time to be lengthened, and a setting of – will cause the 
time to be shortened. With a setting of 0 there will be no 
change.

▼ 2–3: Page Menu Command

☞0–1A: Write Program, 1–1A: Copy Oscillator, 1–1B: Swap 

Pitch EG change (level) (AMS=SW1/Velocity, Intensity= positive (+) value

Note-on

Note-off

Note-on

Note-off

Note-on

Note-off

A note played softly with 
“St” set at 0, “At” set to +, 
and SW1 turned on (the 
settings of 2–3a: Pitch EG)

A note played strongly with 
“St” set to 0, “At” set to +, 
and SW1 turned on

A note played strongly with 
“St” set to 0, “At” set to –, 
and SW1 turned on

Pitch EG changes (Time) (AMS = Velocity, Intensity = positive (+) value)

Note-on

Note-off

Note-on

Note-off

Note-on

Note-off

A note played softly with “At” 
set to + and “Dc” set to + 
(settings of 2–3a: Pitch EG)

A note played strongly with 
“At” set to + and “Dc” set to +

A note played strongly with 
“At” set to – and “Dc” set to –