Midland Radio WR-120 Manuel D’Utilisation

The WR-120 All Hazards Weather Alert Radio can store up to 10 different 

Weather/Hazard alerts. You can review all alerts still in effect by pressing 

▲ 

to scroll through the active alert memory on your weather radio. A double 

beep indicates the end of the list. “NO MESSAGE” will be displayed if no 

alerts are active.

Alert Test:
1.  Press 

to open menu options.

2.  Press 

▲ 

to scroll through menu to ALERT TEST.

3.  Press 

to sound the alert siren.

4.  Press 

to silence the siren then press MENU exit menu 

mode.

Note: Ensure ON/OFF switch is in the ON position.

Set Channel/Volume:
1.  Press 

to open menu options.

2.  Press 

▲

 to scroll through menu to SET CHANNEL then press 

.

3.  *Tune the channel to the desired broadcast by using 

▲ 

or 

▼

. 

Find the channel for your area by visiting http://www.nws.noaa.gov/nwr/
nwrbro.htm and reviewing the corresponding frequency and channel for 
your area using the chart below.

4.  **Adjust the volume to a comfortable level by using 

 or 

.

5.  Press 

to exit menu mode.

* Press the ► button scan to the next channel available channel

**Ensure ON/OFF switch is in the ON position

Channels Preset on the 

Weather Radio

Broadcast Frequency 

(MHz)

1

162.400

2

162.425

3

162.450

4

162.475

5

162.500

6

162.525

7

162.550