Emerson 20/20 Manuel D’Utilisation
9 – 2
Vission 20/20 • Operation and Service Manual •Vilter/Emerson • 35391SC 1.8.5153
as “Unscheduled” if operator does not want to use all
4 events per day.
4 events per day.
Time:
• This setpoint allows selection of Hours, Minutes and
• This setpoint allows selection of Hours, Minutes and
AM/PM values for an event. When time set for an
event is achieved, control mode will get changed as
selected for that event.
event is achieved, control mode will get changed as
selected for that event.
• The range of values allowed to set for Hours setpoint
is 0 – 12 for 12 hour format and 0 – 23 for 24 hour for-
mat. The range of values allowed to set for Minutes
setpoint is 0 – 59. AM/PM selection is active for se-
lection only when Time Format selected in confi gura-
tion screen is 12 hour.
mat. The range of values allowed to set for Minutes
setpoint is 0 – 59. AM/PM selection is active for se-
lection only when Time Format selected in confi gura-
tion screen is 12 hour.
When scheduling feature is enabled and No. of control-
lers for Suction Pressure Control & Process Temperature
Control are changed in confi guration screen which
makes control modes selected in compressor schedul-
ing screen as invalid, then feature will get disabled auto-
matically and indication will be sent to operator to cor-
rect the setting.
lers for Suction Pressure Control & Process Temperature
Control are changed in confi guration screen which
makes control modes selected in compressor schedul-
ing screen as invalid, then feature will get disabled auto-
matically and indication will be sent to operator to cor-
rect the setting.
Section 9 • Compressor Scheduling