OKI MC160n Manuel D’Utilisation
230
Troubleshooting
Media is
wrinkled.
wrinkled.
The media is moist
from humidity or hav-
ing water spilled on it.
from humidity or hav-
ing water spilled on it.
Remove the moist media and replace it
with new, dry media.
with new, dry media.
The media feed roller
or fuser unit is defec-
tive.
or fuser unit is defec-
tive.
Check them for damage. If necessary,
contact Technical Support with the
error information.
contact Technical Support with the
error information.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
(wrong size, thick-
ness, type, etc.) is
being used.
Use Oki approved media.
Data was
sent to the
machine, but
it doesn’t
print.
sent to the
machine, but
it doesn’t
print.
An error message is
displayed in the mes-
sage window.
displayed in the mes-
sage window.
Handle according to the message dis-
played.
played.
It takes a
very long
time to trans-
fer scan data
to the USB
memory
device.
very long
time to trans-
fer scan data
to the USB
memory
device.
The response time
may be slow depend-
ing on the USB mem-
ory device that is
used.
may be slow depend-
ing on the USB mem-
ory device that is
used.
Wait until the transfer is finished.
It is not pos-
sible to enter
Scan mode
or Fax mode.
sible to enter
Scan mode
or Fax mode.
An error has occurred
in Copy mode.
in Copy mode.
Correct the cause of the error, and
then enter a different mode.
then enter a different mode.
Symptom
Cause
Solution