DoubleSight Displays DS-15xx Manuel D’Utilisation

 

OUT OF RANGE 

The input signal is not acceptable by the monitor. 
- Please ensure that the video resolution and refresh 

rate of the graphics card in your computer are 
within specified ranges for the monitor. 

- Please check your computer’s display settings and 

change the screen refresh rate properly.  For 
Windows users, press the Advanced button on the 
Settings tab of Display Properties Window.  And 
then, change the refresh rate of Monitor settings 
on the Monitor tab to 75Hz.  

- Please refer to the “Technical Information” 

section of this User’s Manual to see supported 
frequency ranges. 

NO SIGNAL 

No signal inputs are detected from the VGA 
connector. 
- Check that your computer is ON. 
- Check that the video signal cable is properly 

connected. 

- Ensure that no pins are bent or pushed in the 

video input connector. 

AUTO CONFIG 

The monitor is detecting the input signal and 
automatically adjusting the monitor settings. 
- It takes approximately 5 seconds to finish the 

entire process. 

- It is recommended that you auto-adjust by 

pressing the Auto button every time you change 
the resolution or refresh rate.