Lenovo L2230x Manuel D’Utilisation

 

a.  Click the Audio tab.   
b. Select a USB audio line-out device from the Sound playback list, and 

select a USB  

   audio line-in device from the Sound Recording list.   

c. 

 If you can not use USB microphone connector (red) , you can Click “ Test hardware(T)" 

     on the Audio tab. 

 Click the Playback tab to select a USB audio line-out device and click the Sound 

Recording tab to select a USB audio line-in device. 

Connect a USB device to any of the three USB connectors on the monitor 

with a USB 

cable. When the device is correctly connected to the USB 

connector on the monitor, 

an information window will be displayed in the taskbar notification area on your computer 
screen, indicating that the USB 

device has been connected to the system. 

 

Connect a standard 10 Mbps / 100 Mbps Ethernet connector to the Ethernet 

 connector on  

 the monitor, and wait until the device is fully configured by the Windows operating system.

  

1. L2230x Wide 

USB Port Replicator monitor can work in two video modes:  

Extend mode and Mirror mode   

    a. Extend mode   

      The Extend mode splits your display across multiple monitors. There are two options 

when using the Extend mode:   

      (1) System -Primary: In this mode, your computer display will be the primary display 

      and L2230x Wide USB Port Replicator monitor will be the secondary display.  

   (2) Second Display -Primary: In this mode, L2230x Wide USB Port Replicator Monitor 

Extend mode and monitor will be the primary display and your computer display 

will be the secondary display.   

       b. The Mirror mode clones your computer screen to the monitor.   The port replicator 

automatically selects the settings (screen resolution, 

color quality, and refresh rate)

 

for the external monitor, which will enable 

the best resolution based on your computer 

 

         settings.   

 2. To switch between the Extend mode and the Mirror mode, you can press OSD source key  

    of L2230x Wide USB Port Replicator monitor. It takes a few seconds to switch between the  

  Extend mode and the Mirror mode. During the transition, the display indicators will 

alternatively turn on and off until the 

port replicator finishes configuring the selected mode. 

   You can wait until the new settings take effect and decide whether to modify the 

  video settings or not.  

 To switch the video output modes, also depending on the operating system you are using, 

 do one of the following:   

L2230x Wide USB Port Replicator Monitor User's Guide

4-2