Sharp PNE802 Manuel D’Utilisation

USER
Adjusts each item when the WHITE BALANCE is set to

USER.

R-CONTRAST ....Adjusts bright-toned red component.

G-CONTRAST ....Adjusts bright-toned green component.

B-CONTRAST ....Adjusts bright-toned blue component.

R-OFFSET ..........Adjusts dark-toned red component.

G-OFFSET .........Adjusts dark-toned green component.

B-OFFSET ..........Adjusts dark-toned blue component.
COPY TO USER
Copies the value of white set for PRESET to the USER

setting.

Select “ON” and then press

(In the case other than white, color tone may differ from the

PRESET.)
GAMMA
Selects the gamma. USER sets the gamma to the sent

value (see page 32). (In PIP mode, the main side setting is

reflected in the image.)
DISPLAY COLOR PATTERN
Displays a color pattern. Can be displayed while the menu

screen is displayed, so you can refer to the pattern while

adjusting the image.

OFF ..............No pattern display.

WHITE ..........White single color pattern display.

RED ..............Red single color pattern display.

GREEN .........Green single color pattern display.

BLUE ............Blue single color pattern display.

USER............Red/green/blue mixed color pattern display.

When USER is selected, set each color’s

level.

RESET
Resets the values of the PICTURE menu items to the factory

preset values.

Select “ON” and then press

AUDIO

TREBLE
Adjusts the volume of treble-level sound.
BASS
Adjusts the volume of bass-level sound.
BALANCE
Adjusts the balance of the audio sound between right and left.
RESET
Resets the values of the AUDIO menu items to the factory preset values.

Select “ON” and then press

SETUP

OSD H-POSITION
Adjusts the horizontal display position of menu screen.
OSD V-POSITION
Adjusts the vertical display position of menu screen.
SCREEN MOTION
Residual images are reduced by moving the screen.

PATTERN1 ......... The whole screen moves vertically and

horizontally.

PATTERN2 ......... A black screen spreads from the bottom of

the screen and then shrinks to the bottom

of the screen. If the monitor is installed

in the portrait orientation, a black screen

spreads from the left end of the screen and

then shrinks to the left end of the screen.

PATTERN3 ......... A black bar moves from the left end to the

right end of the screen. If the monitor is

installed in the portrait orientation, a black

bar moves from the top to the bottom of

the screen.

PATTERN4 ......... Black screens appear from both the

top and bottom of the screen, and the

displayed image is compressed into the

central field. If the monitor is installed

in the portrait orientation, the screen is

compressed from the left and right ends.

PATTERN1

PATTERN2

PATTERN4

PATTERN3

MOTION TIME 1
Specify a time period (operating interval) until SCREEN

MOTION starts.
MOTION TIME 2
Specify a time period during which SCREEN MOTION

operates (time period during which the screen will move).
MONITOR
Select the installation direction of the monitor.

LANDSCAPE ............Landscape orientation

PORTRAIT ...............Portrait orientation
MONAURAL AUDIO
Outputs audio signals as monaural.
LANGUAGE
Sets the display language for the menu screen.
POWER ON DELAY
You can delay the screen display after the monitor is turned

on. The period can be set up to 60 seconds in units of one

second. When this function is activated, the power LED

flashes (at approx. 1 second interval) in orange. This function

is disabled when 0 is specified.

Menu Items