ONKYO BR925 Manuel D’Utilisation

64

The CD/HDD receiver has three timers: the sleep timer 
for turning the CD/HDD receiver off after a specified 
period, the play timer for automated playback, and the 
record timer for automated recording.
Up to four programmable timers are available for the 
play and record timers.
The timers can be used with other Onkyo components 
that are connected to the CD/HDD receiver via 

u (see 

 for hookup details).

With the sleep timer, you can set the CD/HDD receiver 
so that it automatically turns off after a specified period. 
This timer is convenient when you want to fall asleep 
while listening to music.

Checking the Remaining Sleep Time
To check the remaining sleep time, press the [SLEEP] 
button.
Note that if you press the [SLEEP] button while the 
remaining sleep time is 10 minutes or less, the sleep 
timer is canceled..

Canceling the Sleep Timer
To cancel the sleep timer, press the [SLEEP] button 
repeatedly until “Sleep Off” appears and the SLEEP 
indicator disappears.

Note:
During recording, the sleep timer can be set. When the sleep 
time period has expired during recording, the 

CD/HDD 

receiver will cancel the recording and enter the Standby 
mode.

Press the [SLEEP] button repeat-
edly to select the required sleep 
time.
The SLEEP indicator and “Sleep 90 
min” appear on the display, as shown.
With the [SLEEP] button, you can set 
the sleep time from 90 to 10 minutes in 
10 minute increments.

To set the sleep time in 1 minute incre-
ments from 99 to 1, use the Up and 
Down [

q]/[w] buttons during the sleep 

time is displayed. The sleep time 
appears on the display for about 8 sec-
onds, then the previous display reap-
pears.

Sleep  90 min