Sony PDW-D1 Manuel D’Utilisation

48

5-1 Starting and Exiting

  Cha

p

ter

 5

   

Us
in

g 

th

e Ut

ilit
y 

So
ftw
a

re

Basic information: Shows product 

information and system information 
(see page 49).

Hours Meter: Shows the cumulative 

number of operating hours of this 
unit (see page 49).

Version: Shows the firmware version 

information (see page 50).

Alarm log: Shows the alarms generated 

by this unit (see page 50).

AV settings: Shows a window for setting 

the operation of this unit, time code, 
audio control, recording format, and 
line mode (see page 50).

Owner setting: Shows a window for 

setting UMID owner information 
(see page 53).

Battery mode setting: Shows a window 

for setting the alarm of remaining 
capacity of the battery pack in this 
unit (see page 54).

Save/recall setup: Shows a window for 

saving or recalling the AV, owner, 
and battery mode settings (see page 
54).

Date/time setting: Shows a window for 

setting the date, time, and time zone 
(see page 54).

Format: Shows a window for formatting 

a disc (see page 55).

Delete clip: Shows a window for deleting 

a clip or clips recorded on the disc 
(see page 55).

c Operating section
Shows the operating window for the 
function selected in the tree display.
Click the ? button to show help information 
on the display.

In the menu bar, select Settings > PC 
operation settings, to open the PC operation 
settings dialog box.
In this dialog box, set the following items.
• Language used for the user interface of 

the utility software

• Enable/disable FAM connection

From the Language list, select the 
desired language, and click the Set 
button.

Exit the utility software, and restart it 
(see page 46).

The language you selected in step 1 is 
now reflected in the utility software 
displays.

In the FAM operation section, select 
either of the following for login, and 
click the Set button.

• Permit: Enable the FAM connection. 

(Select for an FAM connection.)

• Inhibit: Disable the FAM 

connection. (Select for an AV/C 
connection.)

Exit the utility software.

The new setting takes effect when 
exiting the utility software.

 

• If no FAM driver (see page 29) is 

installed in the connected computer, 
setting to “Permit” does not allow an 
FAM connection to be established. (The 
connection is always an AV/C 
connection.)