Sony PDW-D1 Manuel D’Utilisation

52

5-3 Details of Functions

  Cha

p

ter

 5

   

Us
in

g 

th

e Ut

ilit
y 

So
ftw
a

re

When a setting is at the factory default 
value, a colon (‘:’) appears between the 
item name and the setting value.
When the setting has been changed, this 
changes to a dot (‘.’).
Example: PREROLL TIME : 5 SEC 

(setting is factory default)
PREROLL TIME . 8 SEC (setting has 
been changed)

To move from one menu item to another: 

Use the 

V/v buttons, or the up and 

down arrow keys on the keyboard.

To move from one menu level to another: 

Use the 

B/b buttons, or the left and 

right arrow keys on the keyboard.

To change the setting value: With the 

cursor on the setting value, use the 

V/v 

buttons, or the up and down arrow keys 
on the keyboard. (Factory default 
settings are shown with an asterisk 
(*).)

value: In the setting value selection 
screen, click the Reset button.

default values: In the menu item 
selection screen, click the Reset 
button.

To save the changed settings: Click the 

Set button.

To discard the changed settings: Click the 

Cancel button, or press the Esc key on 
the keyboard.

Refer to “AV setting operations” 
(previous item), and change the line 
mode setting.

Press the Set button.

If a disc is present, it is automatically 
ejected.

IMX DATA 
LENGTH

When “IMX50,” 
“IMX40,” or “IMX30” is 
selected in setup 
menu item 
“RECORDING 
FORMAT,” select the 
audio quantization bit 
count and number of 
recording channels.
16bit × 8ch: 16 bits × 

8 channels

24bit × 4ch: 24 bits × 

4 channels

 

When “RECORDING 
FORMAT” is set to 
“DVCAM,” the setting 
is automatically fixed 
at 16 bits 

× 4 channels.

RECORDING 
FORMAT

Select the recording 
format.
IMX50: MPEG IMX 50
IMX40: MPEG IMX 40
IMX30: MPEG IMX 30
DVCAM: DVCAM

525/625 
SYSTEM 
SELECT

Switch between 525-
line and 625-line 
modes.
525: 525-line mode 

(NTSC)

625: 625-line mode 

(PAL)