Sony SDZ-S130 Manuel D’Utilisation
21
Chapter 2 Installation
4
After changing the DIP switch settings, replace the access cover.
If you are using a SDZ-S100 (SCSI model), proceed to “Setting the SCSI ID
(SDZ-S100 only)” on page 22.
If you are using a SDZ-S130 (Fibre Channel interface model), proceed to
“Setting the Loop ID (SDZ-S130 only)” on page 23.
(SDZ-S100 only)” on page 22.
If you are using a SDZ-S130 (Fibre Channel interface model), proceed to
“Setting the Loop ID (SDZ-S130 only)” on page 23.
Block Size
Definition
OFF
Default is 512 byte block size fix mode.
ON
Default is variable mode.
Immediate
WFM
Definition
OFF
Enable Immed bit field in WRITE FILEMARKS command.
ON
Ignore Immed bit field, and always return good status
immediately.
immediately.
UA Control
Definition
OFF
Enable to report UnitAttention (UA) sense.
ON
Disable to report UnitAttention (UA) sense under AIX/IRIX
environment.
environment.