FieldServer FS-8700-105 Manuel D’Utilisation
FS-8700-105_National_Time_and_Signal_FACP Manual
Page 6 of 25
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
Example
//
Client Side Connections
Connections
Port, Protocol,
Baud, Parity, NATSfacp_Timeout,
NATSfacp_Status_DA
P8,
National_Time_Fire, 9600, None, 120s,
DA_NATS_STATUS1
1.05
Client Side Node Descriptors
Create one node for each panel connected to the National Time & Signal Network. You can
have multiple nodes on the same port.
have multiple nodes on the same port.
Section Title
Nodes
Column Title
Function
Legal Values
Node_Name
Provide name for node
Up to 32 alphanumeric characters
Node_ID
This parameter is used to specify
the PANEL number.
the PANEL number.
1-32
Protocol
Specify protocol used
National_Time_FACP,
National_Time_Fire, natsco_facp
National_Time_Fire, natsco_facp
Connection
Specify which port the device is
connected to the FieldServer
connected to the FieldServer
P1-P8
2
Example
// Client Side Nodes
Nodes
Node_Name,
Node_ID,
Protocol,
Connection
Panel1,
1,
National_Time_FACP, P1
Panel2,
2,
National_Time_FACP, P1
2
Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for
details of the ports available on specific hardware.