Adaptec MAN-FC2002-001 Manuel D’Utilisation
107
Installing the Battery
Backup Unit
Backup Unit
The battery backup unit (BBU) for the RAID controller is
installed on the ACM unit (see Figure D-1).
Figure D-1 Location of Battery Backup Unit on ACM
Follow this procedure to install the Battery Backup Unit
(BBU):
1
Remove the ACM from the enclosure by loosening the two
ACM screws and using the handle, slide the ACM out of the
enclosure.
ACM screws and using the handle, slide the ACM out of the
enclosure.
2
Lay the ACM on a flat surface as in Figure D-1 above.
3
Orient the BBU as shown (see Figure D-2).
ACM Assembly
BBU goes here