Adaptec MAN-FC2002-001 Manuel D’Utilisation
Safety Statements
28
Safety Statements
The following safety statements must be read before you
install or operate the 2Gb SANbloc Series. For language
translations of these statements refer to Appendix B.
CAUTION: This equipment is intended only for installation in a
restricted access location.
restricted access location.
CAUTION: Before attempting to install or remove any of the com-
ponents, ensure that anti-static precautions are taken. The mini-
mum requirement is, a properly grounded anti-static wrist strap
and ground wire.
ponents, ensure that anti-static precautions are taken. The mini-
mum requirement is, a properly grounded anti-static wrist strap
and ground wire.
CAUTION: If any of the components are removed the resulting
hole must be blocked, by installing a component blank or replac-
ing the component. Failure to do so can seriously restrict air flow
and cooling.
hole must be blocked, by installing a component blank or replac-
ing the component. Failure to do so can seriously restrict air flow
and cooling.
CAUTION: This device should be connected to a power source
which carries a fuse or circuit breaker that is greater than the rat-
ing of the shelf, but also complies with national wiring standards.
which carries a fuse or circuit breaker that is greater than the rat-
ing of the shelf, but also complies with national wiring standards.
CAUTION: Allow disk drives and power supplies to reach room
ambient temperature before powering on the shelf.
ambient temperature before powering on the shelf.
CAUTION