Nvidia N61V Manuel D’Utilisation

- 22 -

 nVIDIA N61P/N61S/N61V                                                                             User's /Manual

 Phoenix - AwardBIOS CMOS Setup Utility

Advanced BIOS Features

  

► Hard Disk Boot Priority

    Virus Warning
    CPU Internal Cache
    External Cache
    Quick Power On Self Test
    First Boot Device
    Second Boot Device
    Third Boot Device
    Boot Other Device
    Swap Floppy Drive
    Boot Up Floppy Seek
    Boot Up NumLock Status
    Gate A20 Option
    Typematic Rate Setting

  x Typematic Rate (Chars/Sec)
  x Typematic Delay (Msec)

    Security Option
    

APIC Mode

    MPS Version Control For OS
    OS Select For DRAM > 64MB
    Full Screen LOGO Show
    Small Logo(EPA) Show

[Press Enter]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[CDROM]
[Hard Disk]
[LS120]
[Enabled]
[Disabled]
[Enabled]
[On]
[Fast]
[Disabled]

 6
 250

[Setup]
 

Enabled

[1.4]
[Non-OS2]
[Enabled]
[Enabled]

Item Help

 Menu Level  

►

 

↑

↓

→←

:Move Enter:Select   +/-/PU/PD:Value   F10:Save    ESC:Exit   F1:General Help

F5: Previous Values    F6: Fail-Safe Defaults    F7: Optimized Defaults

Press Enter

    4.5.4 Advanced BIOS Features

     ・ 

         

This item selects the hard disks booting priority. By pressing <Enter> key, you can enter 

         

its submenu where the hard disks detected can be selected for the booting sequence to 

         

boot up system.

     ・ 

         

Allow you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection. 

         

If this function is enabled and someone attempt to write data into this area, BIOS will 

         

show a warning message on screen and alarm beep.

     ・ 

         

Enables or Disables the Level-1 Internal Cache memory.

         

Generally, this would only be Disabled for troubleshooting purposes.

     ・ 

         

Enables or Disables the Level-2 External Cache memory.

         

Generally, this would only be Disabled for troubleshooting purposes.

     ・ 

         

When set to [Enabled], this item speeds up the Power On Self Test (POST) after powering 

         

on the system. The BIOS shorten or skip some check during the POST.

     ・ 

         

Select the drive to boot first, second and third in the [First Boot Device], [Second Boot 

         

         

Device], and [Third Boot Device] items respectively. The BIOS will boot the operating 

         

system according to the sequence of the drive selected. Set [Boot Other Device] to 

         

[Enabled] if you wish to boot from another device other than these three items.