Nvidia N61V Manuel D’Utilisation

- 2 -

 nVIDIA N61P/N61S/N61V                                                                             User's /Manual

     ・

         This option allows you to disabled the USB function or select the mode of USB.

     ・

         Available options: [Base Memory (640K)] [Shadow].

     ・

         This item allows you to select [BIOS] for using USB keyboard in DOS environment, or [OS] 

         in OS environment.

     ・

         This item allows you to select [BIOS] for using USB mouse in DOS environment, or [OS] 

         in OS environment.

     ・

         This item allows you to enable or disable the HD audio.

     ・

         Available options: [Disabled] [Enabled].

     ・

         Available options: [Disabled] [Enabled].

     ・

         Available options: [Disabled] [Enabled].

     ・

         This is configurable only when “Machine MAC(NV) Address” is set to “Enabled”.

         IDE HDD Block Mode

         Enable this field if your IDE hard drive supports block mode. Block mode enables BIOS to

         automatically detect the optimal number of block read and writes per sector that the

         drive can support. It also improves the speed of access to IDE devices.

     ・

         

This item selects the way you want your system to power on.

         

[Password]: Use a password to power on the system, select this option then press 

                              

<Enter>. Enter your password. You can enter up to 5 characters. Type in 

                              

exactly the same password to confirm, and then press <Enter>. 

         

[Hot KEY]: Use any of the function keys between <Ctrl+F1> to <Ctrl+F12> to power 

                           

on the system. 

     ・

         If you select [Password],this function will be activation. 

         Press ‘Enter’, and input your password (1-5 characters), then press 'Enter' again. 

     ・

         If you select [Hot Key], this function will be activation. 

         Available options: Ctr-F1~F12

     ・

         This option enables or disables the onboard FDC controller. 

     ・

         This item determines which I/O addresses the onboard Serial Port controller will access. 

         [Auto]: The system automatically select an I/O address for the onboard Serial Port. 

                      [3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3]: Allow you to manually select an 

                      I/O address for the onboard Serial Port. 

         [Disabled]: Disables the onboard Serial Port. 

     ・

         This item allows you to choose the routine IrDA protocol or ASKIR protocol. The IrDA          

         maximum speed is 115.2K bps; ASKIR maximum speed is 57.6K bps. Default setting is 

         Normal.

     ・

         Active This items allows you set the transport speed of the IR devices.