Nvidia N61V Manuel D’Utilisation

- 2 -

 nVIDIA N61P/N61S/N61V                                                                             User's /Manual

    4.5.7 Power Management Setup

     ・

         This item allows you to Enabled/Disabled the Advanced Configuration and Power 

         Management (ACPI).

     ・

         This item allows you to select ACPI Suspend Type.

         This option is for choose ACPI mode (or grade) etc.

Min Saving

If system activity is not detected for 1 hour, all devices except CPU will 

be shut off. If this item is selected, Doze/Standby/Suspend Mode are not 

available.

Max Saving

If system activity is not detected for 10 seconds, all devices except CPU 

will be shut off.

 Phoenix - AwardBIOS CMOS Setup Utility

Power Management Setup

    ACPI Function
    

ACPI Suspend Type

    Power Management
    Video Off Method
    HDD Power Down
    HDD Down In Suspend
    Soft-Off by PBTN
    WOL(PME#) From Soft-Off
    WOR(RI#) From Soft-Off
    Power-On by Alarm

  x  Date(of Month) Alarm
  x  Time(hh:mm:ss) Alarm
    

HPET Support

[

Enabled

]

 S1(POS) 

[User Define]
[DPMS Support]
[Disabled]
[Disabled]
[Instant-Off]
[Disabled]
[Disabled]
[Disabled]

  0
  0 :  0 :  0

[Disabled]

Item Help

 Menu Level  

►

 
 

↑

↓

→←

:Move Enter:Select   +/-/PU/PD:Value   F10:Save    ESC:Exit   F1:General Help

F5: Previous Values    F6: Fail-Safe Defaults    F7: Optimized Defaults

Enabled

     ・

V/HSYNC+Blank

This selection will cause the system to turn off the vertical and 

horizontal  synchronization  ports  and  write  blanks  to  the  video 

buffer.

Blank Screen

This option only writes blanks to the video buffer.

DPMS Support

Initial display power management signaling.( default)

     ・

HDD Power Down 

         When enabled, the hard-disk drives will power down after a set time of system inactivity.          

         All other devices remain active.

     ・

         This option allows you to enabled or disabled the HDD power down function in suspend 

         mode.

     ・

Soft-Off by PBTN 

         Pressing the power button for more than 4 seconds forces the system to enter the Soft-

         Off state.

     ・

         When enabled, NV LAN activity awakens the system from soft-off state.