Manualsbrain.com
  1. Manuels
  2. Marques
  3. Tyan Computer
  4. B5103G12S2
  5. Manuel D’Utilisation

Tyan Computer B5103G12S2 Manuel D’Utilisation

Télécharger
Page de 87
81 
http://www.TYAN.com 
 
Reverse the above sequence when installing the new LCD module. 
 
8.7  Replacing the Power Supply 
To replace the system’s power supply, follow these procedures. 
1.  Remove the cabinet cover (see the previous section in this chapter). 
2.  Remove the secondary hard disk drive (see chapter 7 on Adding a Secondary Hard 
Disk Drive). 
3.  Detach the 4-pin 12 V plug from the ATX 12 V connector on the motherboard as 
well as the 20-pin connector from the ATX connector on the motherboard. Then, 
remove the two screws. 
 
4.  Remove the two screws securing the power supply to the system’s rear panel.