Tyan Computer B5103G12S2 Manuel D’Utilisation

http://www.TYAN.com 

 

Reverse the above sequence when installing the new power supply. 

 

8.8  Replacing the Blower 

To replace the system’s blower, follow these procedures. 

1.  Remove the cabinet cover (see the previous section in this chapter). 

2.  Remove the two screws securing the blower to the system chassis and detach the 

blower to pin-header cable from the connector on the motherboard. 

 

Reverse the above sequence when installing the new blower. 

 

8.9  Replacing the Motherboard 

To replace the motherboard, follow these procedures. 

1.  Remove the cabinet cover (see the previous section in this chapter). 

2.  Remove the primary hard disk drive (see chapter 2 on Installing a Hard Disk Drive). 

3.  Remove the secondary hard disk drive (see chapter 7 on Adding a Secondary Hard 

Disk Drive). 

4.  Remove the power supply (see the previous section in this chapter).