IBM 81Y Manuel D’Utilisation
20
Hardware Maintenance Manual: xSeries 250
Basic and Extended Configuration Status Register Codes:
BCS
ECS
Explanation and possible recovery action
Code not in
table
table
Code not
in table
in table
Explanation:
The ServeRAID controller is not functioning
properly.
Action:
Replace the adapter or the I/O board with integrated
controller.
00
01
Explanation:
Invalid flash configuration.
Action:
Start the IBM ServeRAID Support CD and follow the
instructions that appear on the screen.
00
02
Explanation:
Invalid NVRAM configuration.
Action:
Start the IBM ServeRAID Support CD and follow the
instructions that appear on the screen.
00
03
Explanation:
Invalid flash and NVRAM configuration.
Action:
Start the IBM ServeRAID Support CD and follow the
instructions that appear on the screen.
01
08
Explanation:
No configuration was found in drives, or
online/rebuild drives are not responding.
Action:
Press F4, F5, F7, or F10.
01
18
Explanation:
No configuration was found in drives, or
online/rebuild and hot-spare/standby hot-spare drives are not
responding.
responding.
Action:
Press F4, F5, F7, or F10.
01
28
Explanation:
No configuration was found in drives, or
online/rebuild and ready/standby drives are not responding.
Action:
Press F4, F5, F7, or F10.
01
38
Explanation:
No configuration was found in drives, or
online/rebuild, hot-spare/standby hot-spare, and
ready/standby drives are not responding.
ready/standby drives are not responding.
Action:
Press F4, F5, F7, or F10.
01
48
Explanation:
No configuration was found in drives, or
online/rebuild drives are not responding and unidentified drives
were found.
were found.
Action:
Press F4, F5, F7, or F10.
01
58
Explanation:
No configuration was found in drives, or
online/rebuild and hot-spare/standby hot-spare drives are not
responding and unidentified drives were found.
responding and unidentified drives were found.
Action:
Press F4, F5, F7, or F10.
01
68
Explanation:
No configuration was found in drives, or
online/rebuild and ready/standby drives are not responding
and unidentified drives were found.
and unidentified drives were found.
Action:
Press F4, F5, F7, or F10.