Emerson MVME147 Manuel D’Utilisation

Page de 170
Inquiry Packet
7-55
7
Inquiry Packet
The inquiry command ($12) returns information from the controller that 
identifies which controller is attached and its attributes.  The format and the 
number of bytes returned varies from controller to controller (refer to the 
appropriate controller manual for this information).  
The returned data is put in the specified address, and the length does not 
exceed the data length provided; however, the actual length and content 
information returned depends upon the controller.  
The first table below shows the inquiry packet.  The second table shows the 
inquiry data return packet.  
Even Byte \
Odd Byte \
$17
xxxxxxxx
Vector number to use 
upon return
$18
xxxxxxxx
Status from SCSI 
firmware (byte 2) 
(Note 1)
$19
xxxxxxxx
Status from SCSI 
firmware (byte 3) 
(Note 1)
$1A
00000000
00000000
Reserved
$1C
xxxxxxxx
xxxxxxxx
Bytes per block
NOT
E:
1.
Refer to Chapter 3.
2.
Buffered writes are used to allow time for additional data to be transferred, 
thus keeping the tape streaming.  If non- buffered, controller returns status 
only after all data has been written to the tape.  If buffered, controller returns 
a good status when all data has been transferred to the buffer, although all 
data may not yet have been written to the tape.  
3.
Returned on Mode Sense.
FC
B8
74
30