Emerson PMC-CGM Manuel D’Utilisation

The following table lists all event codes and their severity. Events which cause the module to 
give up mastership are marked with an asterisk in the "severity" column.

.1.3.1.1.4

cgmEventCode

A pre-defined event code - for details refer to 

.

r

.1.3.1.1.5

cgmEventData

Event specific data

r

.1.3.1.1.6

cgmEventDescr

Textual event description

r

inputChanged (1)

Event

The selected PLL input has changed.

lostLock (2)

Event

The T0 PLL lost lock and enters holdover mode.

gainedLock (3)

Event

The PLL gained lock.

nowMaster (4)

Event

The module has acquired mastership.

nowSlave (5)

Event

The module has entered slave mode.

validInputsChanged (6)

Event

The validity or more of the PLL inputs has changed .

selectedInputFailed (7)

Event

The selected clock input has failed.

dpllInitError (10)

Warning

Error while initializing the DPLL.

freqValidationError( 11)

Warning

One of the clock sources measured in the FPGA is out 
of range.

inputStateChange (12)

Event

Reported when a state change is detected by the 
activity monitor.

EventData: Upper 16 bits encode the new state, lower 
16 bits encode the input number.

State can be 

0 (working)

1 (failing)

2 (failed)

3 (recovering)

4 (unknown)

This is the same information as presented in the 
cgmInputActivityMonitor element.

lineCardClkError (20)

Warning

Not applicable for PMC-CGM.

lineCardClkSelected (21)

Event

Not applicable for PMC-CGM.

bitsRlof/c (30/34)

Event

"Loss of frame" / "Loss of frame cleared" event  
detected on a BITS interface.

EventData: The BITS interface on which the event has 
been detected (0 or 1).