Emerson PMC-CGM Manuel D’Utilisation

The cgmSys branch contains the following information:

z

cgmEventTable - for details refer to 

.

z

Various MIB objects that are described in 

For a description on how to use these objects refer to 

The cgmEventTable (OID:.1.3.6.1.4.1

.3656

.8152.1.3.1) uses cgmEventNumber as index. The 

elements of the trap definiton cgmLogEvent (OID:.1.3.6.1.4.1.3656.8152.1.2.0.1) is identical to 
the elements defined in cgmEventTable.

.1.1.41

cgmCLK2OutputFrequency

The output frequency of CLK2:

0 - CLK2 output disabled

1 - 19.44 MHz

Default value is (1).

r/w

.1.1.42

cgmCLK3OutputFrequency

Not supported on PMC-CGM r/w

.1.1.43

cgmCLK1OutputFramePulse

The output frame pulse of the T1 clock:

0 - Not inverted, not pulsed

1 - Not inverted, pulsed

2 - Inverted, not pulsed

3 - Inverted, pulsed

Default value is (0).

r/w

.1.1.44

cgmT4ClkSquelch

When set to 0 (enable) the output of the T4 PLL 
is squelched if no valid input is selected.

If set to 1 (disable) an output is provided in any 
case.

.1.3.1.1.2

cgmEventTime

System time stamp when event occurred (this is the 
module's run-time since power-up).

r

.1.3.1.1.3

cgmEventSeverity

The event's severity level

1. Critical (0): An error has occurred which needs 
immediate attention.

2. Warnings (1): An error has occurred which may affect 
board operation but does not require immediate attention.

3. Events (2): An event occurred in a board subsystem 
which may need attention (e.g. the PLL gained lock).

4. Information (3): Various information messages helpful 
for troubleshooting or monitoring the state of the CGM 
module.

r