Advantech PCA-6185 Manuel D’Utilisation
PCA-6185 User’s Manual
34
3.4.1 Boot Seq & Floppy Setup
3.4.1.1 First Boot/Second Boot/Third Boot/Other Boot Device
You can select the priority of your boot devices. Choices are:
Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3,
ZIP100, USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, LAN, Dis-
abled.
3.4.1.2 Swap Floppy Drive
If the system has two floppy drives, choose "Enable" to assign physical
drive B to logical drive A and vise versa.
3.4.1.3 Boot UP Floppy Seek
Selection of the command “Disabled” will speed the boot up. Selection of
“Enabled” searches disk drives during boot up.
You can select the priority of your boot devices. Choices are:
Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3,
ZIP100, USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, LAN, Dis-
abled.
3.4.1.2 Swap Floppy Drive
If the system has two floppy drives, choose "Enable" to assign physical
drive B to logical drive A and vise versa.
3.4.1.3 Boot UP Floppy Seek
Selection of the command “Disabled” will speed the boot up. Selection of
“Enabled” searches disk drives during boot up.
Figure 3.4: Boot sequence