Advantech AIMB-250 Manuel D’Utilisation

AIMB-250 User’s Manual 

 

27

 

This chapter explains you the instructions of how to setup your system. 
1.  Turn off the power supply. 
2.  Insert the DIMM module (be careful with the orientation). 
3.  Insert all external cables for hard disk, floppy, keyboard, mouse, USB etc. except for flat 

panel. A CRT monitor must be connected in order to change CMOS settings to support 
flat panel. 

4.  Connect power supply to the board via the ATXPWR. 
5.  Turn on the power. 
6.  Enter the BIOS setup by pressing the delete key during boot up. Use the “LOAD BIOS 

DEFAULTS” feature. The Integrated Peripheral Setup and the Standard CMOS Setup 
Window must be entered and configured correctly to match the particular system 
configuration. 

7.  If TFT panel display is to be utilized, make sure the panel voltage is correctly set before 

connecting the display cable and turning on the power.   

• 

The processor socket comes with a screw to secure the processor, please unlock the 
screw first. 

• 

Position the CPU above the socket and the gold triangular mark on the CPU must 
align with pin 1 of the CPU socket. Then Insert the CPU gently seated in place. 

• 

Turn the screw to the lock position. 

 

 

 

 

 

 

 

 

 

 

 

 

 

Do not force the CPU into the socket. It may bend the pins and damage the 
CPU. 

Unlock

Pin 1 of the 
socket

Gold 
triangular 
mark

Lock