Q-Logic 8200 Manuel D’Utilisation

6–iSCSI Noninteractive Commands
-dc (Display Destination Cache [IPv6 only])

6-6

SN0054667-00  C

The IPv6 destination cache contains the IP address, next-hop IP address, and 
path MTU information about both local and remote destinations. For multicast and 
on-link unicast destinations, the next-hop IP address always matches the 
destination IP address. For unicast destinations that are off-link, the next-hop IP 
address is the IP address of the router. 

To display the destination cache, issue the -dc command as follows: 

-dc <hba_port_inst> 

To display the connection error logs for up to 100 latest connections, issue the 
-dce command as follows:

-dce <hba_port_inst> <target_id> <filename>

If <hba_port_inst> and <target_id> are not specified, all entries for all adapter 

ports are displayed. If <filename> is specified, then the log is written to that file.

To add a default BIDI CHAP entry to the specified hba_port_inst, issue the 
-defbidi command as follows:

-defbidi <hba_port_inst> <chap_secret>

Where <chap_secret> is the CHAP secret. 
The adapter is reset after this command is issued.

To delete the specified CHAP entry, issue the -delchap command as follows:

-delchap <hba_port_inst> <CHAP>

Issuing this command resets the adapter.

To view the firmware properties, issue the -df command as follows:

-df <hba_port_inst> 

QConvergeConsole CLI displays information about the adapter: model, serial 
number, port number, iSCSI name, alias, IP address, instance number, and the 
following firmware information:



FW information for instance



FW version