Q-Logic 8200 Manuel D’Utilisation

6–iSCSI Noninteractive Commands
-ei

6-10

SN0054667-00  C

Issuing this command resets the adapter.

To get information about errors and exit codes for noninteractive mode, issue the 
-ei command as follows (no parameters are required):

-ei

The firmware runs the tasks involved in data management, the iSCSI protocol, 
and general adapter functioning. Use the -f command to update the firmware 

image.

To update the adapter firmware from a specified file, issue the -f command as 

follows:

-f <hba_port_inst> <file name>

Both parameters are required. The <hba_port_inst

 is the adapter to update. 

The <file name> is the file containing the firmware image to upload to the 

adapter. Be sure to use full path names. Issuing this command resets the adapter. 

To view general system information, issue the -g command as follows:

-g

QConvergeConsole CLI shows the following:



Host name



Host version



Host type



User type

CHAPName

CNAME

character string

CHAPSecret

CSECRET

character string

CHAPBidi

CBIDI

on or off