Q-Logic 8200 Manuel D’Utilisation

6–iSCSI Noninteractive Commands

-gcr (Retrieve FW Crash Record)

SN0054667-00  C

6-11

To get crash record information for the specified adapter port, issue the -gcr 

command as follows:

-gcr <hba_port_inst> <Crash Output File>

To view the QConvergeConsole CLI help file, issue the -h command as follows:

-h

For convenience, you can send the output to a file for easier viewing or printing as 
follows:

qaucli -pr iscsi –h >file.txt

Use the -i command to view a list of all detected adapter port instances (“ports”) 

in the system. Each port instance (hba_port_inst) is identified by its number. 

To view general adapter information, issue the -i command as follows:

-i [hba_port_inst]

When you use hba_port_inst, information for only that adapter port instance is 

shown. When you do not use hba_port_inst, information for all ports in the 

system is shown. 

The following adapter (port) information is shown:



Item number (order in which ports were detected)



Adapter number, that is, the number of this adapter in the detection process



Adapter port number (0 or 1) for this adapter 



Port instance number in the system (two-port adapters appear twice)



Port Instance on the adapter



Adapter model number (for example, QLA4010)



Adapter serial number (for example, TFC0105C51704)



Firmware version (for example, 3.0.1.45)



Connection medium



IP address (IP address of the adapter port instance)



iSCSI name (adapter port iSCSI name; the QLogic default name or one you 
assign)



Alias (adapter port instance iSCSI alias name that you assign)

 shows how to read the display.