Q-Logic 8200 Manuel D’Utilisation

6–iSCSI Noninteractive Commands
-isns (Configure iSNS Settings)

6-14

SN0054667-00  C

To configure the iSNS settings for QLA4010 and QLA405x, issue the -isns 

command as follows:

-isns <hba_port_inst

> [iSNS IP Address] [iSNSPORT <port_number>]

If you do not specify the [iSNS IP Address] parameter, the command disables 

the iSNS client on the specified adapter port.

Issuing this command resets the adapter.

To configure the iSNS settings for IPv6 (QLE406x and newer), issue the -isns6 

command as follows:

-isns <hba_port_inst> [iSNS IPv6-or-IPv4 Address] [-iSNSPORT 
<port_number>]

If you do not specify the [iSNS IPv6-or-IPv4 Address] parameter, this 

command disables the iSNS client on the specified adapter port. 

Issuing this command resets the adapter.

Use the -l command to view the following information about LUNs attached to 

the selected target:



Adapter/Target/LUN number



Vendor name



Product ID



Product revision



LUN size

You can view this information for a specific LUN or for all LUNs attached to the 
selected target.

To list the LUN information, issue the -l command as follows:

-l <hba_port_inst> <Target ID [LUN ID]>

If you do not include the LUN ID parameter, all the LUNs on the specified target 

are shown.