Brother T76 Manuel D’Utilisation

Page de 98
28
   Chapter 3
Reception into Memory
As soon as the paper cassette becomes empty during fax reception, the screen will display “CHECK 
PAPER
”; please put some paper in the paper cassette. See “Load paper” on page 2.
If the MEMORY RECEPTION switch is ON at this time…
The current fax reception will continue, with the remaining page(s) being stored in memory, subject 
to available memory. Subsequent incoming faxes will also be stored into memory until the memory 
is full, following which no further incoming fax calls will be automatically answered; all data will 
be printed as soon as fresh paper is put in the paper cassette.
If the MEMORY RECEPTION switch is OFF at this time…
The current fax reception will continue, with the remaining page(s) being stored in memory, subject 
to available memory. Subsequent incoming fax calls will not be automatically answered until fresh 
paper is put in the paper cassette. The last fax received will be printed as soon as fresh paper is put 
in the cassette.
1
Press 
Menu/Set
2
6
. The screen displays
2
Use 
 or 
 to select ON or OFF, and press 
Menu/Set
 when the screen displays your selection.
3
Press 
Stop
 to exit.
Printing a Fax from Memory (Only for FAX-T74)
If you have fax storage ON for remote retrieval, you can still print a fax from the machine’s memory 
when you are at your machine. See “Setting Fax Storage” on page 51.
1
Press 
Menu/Set
8
4
.
2
Press 
Start
.
3
Press 
Stop
.
When you use Auto Reduction to reduce incoming documents to fit on one page 
of recording paper, you can do so only as long as the original document is not 
longer than 35 cm. If the original is longer than 35 cm, the data will not be 
reduced and will carry over to print on a second page.  
When you use Auto Reduction and you receive an incoming document that is 
smaller than your recording paper, no reduction will take place, and you will get 
the same size recorded as the original.
6.MEM.RECEIVE