Brother T76 Manuel D’Utilisation

  Telephone   

You can use your machine to make voice telephone calls, by dialling manually or by using One 
Touch or Speed Dial memory. You can use the handset or if you have the FAX-T76 you can use the 
Speakerphone to make and receive calls. For more details, see “Dialling a Number” on page 22 and 
22.

The “full-duplex” digital Speakerphone allows you to operate the phone hands free, or allows more 
than one person in the room to participate in a two-way phone conversation. When using the 
Speakerphone, make sure that you speak clearly. If the other party has difficulty hearing you, move 
closer to the microphone.

Dial the number by using the dial pad or Quick-Dial keys.

The number you are dialling, or the name you have stored for One Touch or Speed Dial is 
displayed on the LCD.

For FAX-T74 press

 

 and pick up the handset when you hear the 

call answered on the

 monitor 

speaker. If you press 

 before lifting the handset, the call will be disconnected. 

Replace the 

handset to finish the call.

For

 the FAX-T76, 

press 

, 

and when the call is answered, 

you can now speak to the party at 

the other end without lifting the handset. Press 

 when you finish the 

conversation.

If you’re calling someone and the line is busy, you can retry the number by pressing 

.

Pick up the handset—OR—Press 

.

Press 

.

To hang up, replace the handset—OR—Press 

.

Press 

 to insert a pause between digits to be dialled.

If your fax machine is connected to a PABX, you may need to insert an additional number prefix 
(e.g. “9”) and a “pause” before each fax or telephone number to gain access to the outside line. When 
you press 

, a dash “-” will appear on the display. By storing a pause, you can create 

a delay of 3.5 seconds.

If you have pulse dialling service, but need to send tone signals (for telephone banking, for example). 
Follow the directions below

, but

 if you have touch tone service, you do not need this feature to send 

tone signals.

Lift the handset and press 

.

Any digits dialled after this sends tone signals.

When you hang up, the machine returns to pulse dialling service.