Brother T76 Manuel D’Utilisation

   Chapter 12

You may occasionally encounter a difficulty with your machine or telephone line. If this happens, 
your machine often identifies the problem and displays an error message. The list below explains the 
most common error messages.

The paper is jammed in the machine. See “Clearing Jams” on page 67.

The FAX/MFC is out of paper or 
paper is not properly loaded in the 
multipurpose sheet feeder.

Refill the paper or remove the paper 
and load it again and then press 

.

The scanner is dirty.

See “Regular Maintenance” on 
page 70.

A poor quality phone line resulted 
in a communications error.

Try the call again.

CONNECTION FAIL You have requested a polling call 

from another party, but the other fax 
machine is not in Poll Waiting mode.

Verify the other parties polling 
setup.

The other party has disconnected 
during a call or fax.

Try calling the other party.

The documents were not inserted or 
fed properly, or were too long.

There is a mechanical problem.

Cut the power off. Then contact 
your Brother dealer for service.

The number you called does not 
answer or is busy. You may also 
have reached a number not 
connected to a fax.

Check the number and call again.

You’ve tried accessing a One 
Touch or Speed Dial location with 
no number assigned to it.

See “Setup Quick Dial Numbers 
for Easy Dialling” on page 18 for 
information about storing One 
Touch or Speed Dial numbers.

The print head has overheated.

Unplug the machine and wait 30 
minutes for it to cool.

Scanner needs cleaning.

Clean the white tape and the glass 
strip under the tape. See “Regular 
Maintenance” on page 70. If you 
still get a scanner error, contact 
Brother dealer for service.

The top cover is not completely 
closed.

Close the top cover.