Panasonic KX-FT908HK Manuel D’Utilisation
6
1. Installation and Quick Start
1.4 Recording paper
A
Open the cover by pressing the cover open
button (
button (
1).
B
Install the recording paper.
C
Insert the leading edge of the paper into the
opening above the thermal head (
opening above the thermal head (
1).
D
Pull the paper out of the unit.
L
Make sure that there is no slack in the
paper roll.
paper roll.
E
Close the cover securely by pushing down on
both sides.
both sides.
F
For KX-FT902:
Press {FAX/START}, then tear off the
excess paper by pulling it towards you.
Press {FAX/START}, then tear off the
excess paper by pulling it towards you.
For KX-FT904/KX-FT908:
Press {FAX/START} to cut the paper.
Press {FAX/START} to cut the paper.
Correct
Incorrect
1
1
Note:
L
If the paper is secured with glue or tape,
cut approximately 15 cm from the
beginning of the roll before installing it.
cut approximately 15 cm from the
beginning of the roll before installing it.
L
When the power cord is connected, a
message is printed each time the cover is
opened then closed. If the recording paper
is installed upside down, the message will
not be printed. Install the paper correctly.
message is printed each time the cover is
opened then closed. If the recording paper
is installed upside down, the message will
not be printed. Install the paper correctly.
L
For accessory information, see page 4.
{
FAX/START}
FT-902-904-908HK.book Page 6 Tuesday, June 15, 2004 5:44 PM