Emerson N400C Manuel D’Utilisation

Removal and Replacement Procedures

Maintenance and Service Guide

3. Disconnect the modem/NIC cable from the modem/NIC 

board 1 (Figure 5-16).

4. Pull away the retention clips on each side of the modem/NIC 

board 2. The modem/NIC board tilts upward.

5. Lift the edge of the modem/NIC board and slide it out of the 

connector at a 45-degree angle 3.

6. Place the modem/NIC board in an electrostatic-safe 

container.

Reverse the above procedure to install the modem/NIC board.