Emerson N400C Manuel D’Utilisation
Removal and Replacement Procedures
Maintenance and Service Guide
5–23
Evo Notebook N400c models only—If you are removing a
pointing stick keyboard, you must first remove the palm rest so
the pointing stick button cable can be disconnected. Refer to
Section 5.5 for palm rest removal instructions.
pointing stick keyboard, you must first remove the palm rest so
the pointing stick button cable can be disconnected. Refer to
Section 5.5 for palm rest removal instructions.
If you are removing a TouchPad keyboard, it is not necessary to
remove the palm rest prior to removing the keyboard.
remove the palm rest prior to removing the keyboard.
1. Prepare the notebook for disassembly (Section 5.3).
2. Turn the notebook bottom side up with the front facing
forward.
3. Remove the four TM2.0 × 6.0 screws that secure the
keyboard to the base enclosure (Figure 5-17).
Figure 5-17. Removing the Keyboard Screws