Emerson N400C Manuel D’Utilisation
5–30
Maintenance and Service Guide
Removal and Replacement Procedures
2. Disconnect the display signal 1 and backlight 2 cables from
the system board (Figure 5-23).
✎
When the display screws are removed, the display assembly is
unsupported. Make sure to provide support for the display
assembly when removing the display screws.
unsupported. Make sure to provide support for the display
assembly when removing the display screws.
3. Remove the four TM2.0 × 6.0 screws 3 that secure the
display to the base enclosure.
4. Remove the display.
Figure 5-23. Removing the Display