Emerson N400C Manuel D’Utilisation
Removal and Replacement Procedures
Maintenance and Service Guide
5–31
✎
When replacing the display, make sure the display cables are
routed as indicated in Figure 5-24. To ensure proper alignment of
the display, loosely install the screws in the 1, 2, 3, 4 sequence
indicated. After all four screws have been loosely installed,
tighten them.
routed as indicated in Figure 5-24. To ensure proper alignment of
the display, loosely install the screws in the 1, 2, 3, 4 sequence
indicated. After all four screws have been loosely installed,
tighten them.
Figure 5-24. Routing the Display Cables and Installing the
Display Screws
Display Screws