Emerson N400C Manuel D’Utilisation

Maintenance and Service Guide

Removal and Replacement Procedures

5. Position the notebook so the front faces you.

✎

Steps 6 through 11 apply only to Evo Notebook N410c models.

6. Lift the RJ45/RJ11 connector module 1 out of the base 

enclosure (Figure 5-26).

7. Disconnect the microphone cable 2 from the connector on 

the display lid switch board.

8. Disconnect the microphone cable 3 from the system board.

9. Remove the PM 2.0 × 5.0 screw 4 that secures the display lid 

switch board to the base enclosure.