Emerson N400C Manuel D’Utilisation

Maintenance and Service Guide

Removal and Replacement Procedures

✎

Steps 12 through 16 apply only to Evo Notebook N400c models.

12. Remove the RJ45/RJ11 connector module 1 from the base 

enclosure (Figure 5-28).

13. Disconnect the microphone cable 2 from the display lid 

switch board.

14. Disconnect the microphone cable 3 from the system board.

15. Remove the PM2.0 × 4.0 screw 4 that secures the display lid 

switch board to the base enclosure.

16. Remove the modem cable.

Reverse the above procedure to install the modem cable.