Cisco Systems Gateway 10 Manuel D’Utilisation

Table 2 lists the recommended tools and supplies.

1

Number 2 Phillips screwdriver

—

1

Wire-stripping tool

—

1

Crimping tool

This tool must be large enough to accommodate the girth of the 
grounding lug when you crimp the grounding cable into the lug. 

1

2-hole chassis grounding lug

Included in the accessory kit. 
The 90 degree grounding lug has two M5 holes spaced 0.63 in 
center to center. If the lug from the accessory kit is misplaced, use 
an alternate lug (for example, Panduit LCD6-10AF-L or Pencom 
EL1048).

1

Grounding wire

6 AWG (16 mm

2

)

The length of the grounding wires depends on the location of your 
chassis within the site and its proximity to proper grounding 
facilities.

2

Two M5 (metric) phillips head screws

Included in the accessory kit for use to attach the chassis ground 
to the chassis.

1

Antistatic mat and ESD-wrist strap

—

10

2-hole Power Supply Lugs

Included in the accessory kit. Lugs are for power and ground to the 
DC PEM.

Panduit LCD4-14AF-L, 2-hole, M6, 90 degree, 4 AWG wire, 0.63 
spacing.

5

Power supply wire

4 AWG (25 mm2)

1

10 mm socket wrench

This is used for securing the M6 nuts on the PS DC inputs and 
ground terminals.

The unit “mm” stands for milli meter.