Manualsbrain.com
  1. Manuels
  2. Marques
  3. Canon
  4. AXIS 1650
  5. Manuel D’Utilisation

Canon AXIS 1650 Manuel D’Utilisation

Télécharger
Page de 75
Print Server Management and Configuration
48
AXIS 1650 User’s Manual
Setting Restrictions
To change print server permissions and restrictions, select Admin | 
General Settings => Change and select the Restrictions tab in the Web 
interface.
TCP Restriction Enabled
When set to Yes, users specified in the IP Address List are rejected or 
accepted (depending on how the TCP Restriction Mode is set), to send 
print jobs over the print server. 
Default = No
TCP Restriction Mode
When set to Accept, users specified in the TCP Restriction IP Address List 
are allowed to use this print server. 
When set to Reject, users specified in the TCP Restriction IP Address List 
are not allowed to use this print server.
Default = Accept
TCP Restriction IP Address
List
Here you specify the users which are allowed (or not allowed, depending 
on how TCP Restriction Mode is set) to use the print server. IP addresses 
or ranges of IP addresses can be specified:
Example IP addresses: 10.13.16.150, 10.13.16.151 
Example IP address range: 10.13.16.160-0.13.16.170 
Default = <blank>
Note: If your print server is connected to a CAPT 1.0 printer you will 
receive an error message stating Network Error if you are not allowed to 
print with this print server
SNMP Restriction Enabled
When set to Yes, users specified in the SNMP Restriction IP Address List 
are rejected or accepted (depending on how the SNMP Restriction mode is 
set).
Default = No
SNMP Restriction Mode
When set to Accept, only users specified in the SNMP Restriction IP 
Address List are permitted to specify/browse the settings for the device 
using the SNMP protocol.
When set to Reject, only users specified in the SNMP Restriction IP 
Address List are rejected from specifying/browsing the settings for the 
device using the SNMP protocol.
Default = Accept
SNMP Restriction IP
Address List
Users specified here are rejected or accepted. IP addresses or ranges of IP 
addresses can be specified as follows:
Example IP addresses: 10.13.16.150, 10.13.16.151
Example IP address range: 10.13.16.160-10.13.16.170
Default = <blank>
SLP Restriction Enabled
When set to Yes, users specified in SLP Restriction IP Address List are 
rejected or accepted (depending on how the SLP Restriction Mode is set).
Default = No 
SLP Restriction Mode
When set to Accept, only users specified in the SLP Restriction IP Address 
List are permitted to specify/browse the settings for the device using the 
SLP protocol. 
When set to Reject, only users specified in the SLP Restriction IP Address 
List are rejected from specifying/browsing the settings for the device