Canon AXIS 1650 Manuel D’Utilisation

AXIS 1650 User’s Manual

49

using the SLP protocol. 

SLP Restriction IP Address

List

Users specified here are rejected or accepted.IP addresses or ranges of IP 

addresses can be specified as follows: 

To change the print server’s network settings, select Admin | Network 
Settings | Detailed View in the Web interface.

Frame Type

AXIS 1650 uses frame type Ethernet II for network packages. 

LPD Banner Page Mode

Check the appropriate box to specify if the LPD banner page is to be 

printed. 

Off disables the LPD banner page. 

Auto prints the LPD banner page first or last depending on your operating 

system. 

Last forces the printer to print the LPD banner page last, independently of 

operating system. 

Default value = Off 

Note: LPD Banner Page Mode is not available for Canon printers 

supporting Canon Advanced Printing Technology or Canon Advanced 

Raster Printing System.

IP Address

Specify the IP address of your print server in the format w.x.y.z. You 

should acquire a unique and unused IP address from your Network 

Administrator in order to prevent conflicts with other network devices.

Note: If DHCP, BOOTP or RARP is enabled, your manual settings might be 

overridden when you restart the print server. To make sure that this will 

not happen, you are advised to disable BOOTP and RARP when you are 

setting the IP address manually, DHCP is disabled by default.

Important: If you change the IP address you will lose contact with the 

print server. You must enter the new IP address of the print server in the 

address/location field of your Web browser to continue to configure and 

manage the print server via the Web browser.

Subnet Mask

Specify the subnet mask used for determining when the traffic should be 

sent via a router. This number, in combination with the IP address, 

identifies on which network the print server is located. The normal class C 

subnet mask value is usually 255.255.255.0. 

Default Router

Specify the IP address of the default router. All traffic directed outside the 

local network, defined by the subnet mask, is sent to the default router. 

Any re-routing via other routers is done automatically. The setting 0.0.0.0 

indicates that no default router is set. If that is the case, the print server