Server Technology Global Security Modem Manuel D’Utilisation
Setting the maximum Callback attempts
The AT#CBA command is used to set the maximum number of callback attempts the modem will
make. The valid range for Callback attempts is 1to 255. The default value is 4.
make. The valid range for Callback attempts is 1to 255. The default value is 4.
To set the maximum Call back attempts:
After successfully logging into the modem with the Setup password, type at#cba, followed by the
maximum number of attempts and press Enter.
maximum number of attempts and press Enter.
Type atz and press Enter to reset the modem with the new settings.
Example
The following command sets the maximum Callback attempts to 1:
at#cba1<Enter>
OK
atz<Enter>
OK
OK
atz<Enter>
OK
Setting the Callback delay
The AT#CBD command is used to set the length in time the modem waits before attempting a callback.
The valid range for the delay is 1 to 255 in seconds. The default value is 15.
The valid range for the delay is 1 to 255 in seconds. The default value is 15.
To set the Callback delay:
After successfully logging into the modem with the Setup password, type at#cbd, followed by the
delay (in seconds) and press Enter.
delay (in seconds) and press Enter.
Type atz and press Enter to reset the modem with the new settings.
Example
The following command sets the Callback delay to 30 seconds:
at#cbd30<Enter>
OK
atz<Enter>
OK
OK
atz<Enter>
OK
Displaying Callback failed attempts counter
The Sentry integrated Modem counts the number of failed Callback passwords attempts since a reset or
power-up. The AT#CBF command is used to display this count.
power-up. The AT#CBF command is used to display this count.
NOTE: The &W command may be used with the AT#CBF command to store this number in nonvolatile memory.
To display the failed attempts counter:
Type at#cbf and press Enter.
Type atz and press Enter to reset the modem with the new settings.
Resetting the Callback failed attempts counter
The AT#CBFR command is used to reset the Callback failed attempts counter.
To reset the failed attempts counter:
Type at#cbfr and press Enter.
Type atz and press Enter to reset the modem with the new settings.
Sentry Global Security Modem
Operations
• 9
Installation and Operations Manual