Server Technology Global Security Modem Manuel D’Utilisation
Chapter 3: Operations
The Sentry Global Security Modem is a v.92 (56K) data modem and provides out-of-band access to the
Sentry Remote Power Manager. The Sentry integrated Modem additionally supports Callback Security
and Remote Configuration.
Sentry Remote Power Manager. The Sentry integrated Modem additionally supports Callback Security
and Remote Configuration.
NOTE: Sentry RPMs with integrated modems manufactured prior to June 30, 2003 may contain older OEM modem
modules. Use the ATI3 command to positively identify the type of integrated modem; the new Security Modem will
display ‘MT5634SMI’ in the response string. For support on configuring older modems, please contact Technical Support.
modules. Use the ATI3 command to positively identify the type of integrated modem; the new Security Modem will
display ‘MT5634SMI’ in the response string. For support on configuring older modems, please contact Technical Support.
Logging In
You may log directly into the Global Security Modem to configure the Country Code, enable Callback
Security or other features. To log into the modem follow steps 1 through 3 from To initially configure
the modem: below.
Security or other features. To log into the modem follow steps 1 through 3 from To initially configure
the modem: below.
Initial Configuration
The Global Security Modem requires no initial configuration, with the exception of the Country Code,
to operate as a standard modem without the optional security mechanisms enabled; Callback Security is
disabled by default.
to operate as a standard modem without the optional security mechanisms enabled; Callback Security is
disabled by default.
Provided are instructions to configure the modem through a serial/Pass-Thru connection from the
Sentry: prompt. The instructions below assume that the default Setup password has not been changed.
Sentry: prompt. The instructions below assume that the default Setup password has not been changed.
To initially configure the modem:
1. At the Sentry: prompt, type connect modem and press Enter.
2. After receiving the Connection Complete banner, type ate1q0v1 and press Enter. This
2. After receiving the Connection Complete banner, type ate1q0v1 and press Enter. This
enables the modem’s command echo and enables verbose result code mode.
3. Type at#sMTSMODEM and press Enter to authenticate and enter configuration mode.
If the password is incorrect, the modem will display
Error
.
4. Type at%t19,0, followed by the appropriate Country Code (see page 6) and press Enter.
5. Type ati19 and press Enter to verify the configured Country Result Code.
6. Type atz and press Enter to reset the modem with the new settings.
7. Type !*login and press Enter to break the Sentry serial connection to the modem. The Sentry will
5. Type ati19 and press Enter to verify the configured Country Result Code.
6. Type atz and press Enter to reset the modem with the new settings.
7. Type !*login and press Enter to break the Sentry serial connection to the modem. The Sentry will
display the Disconnecting… banner and return to the Sentry username: prompt.
NOTE: Server Technology recommends use of the ATZ command after any configuration changes to insure that they are
stored and that the modem is reinitialized with them. Re-authentication, step 3, is required after using the ATZ command
for any additional configuration changes.
stored and that the modem is reinitialized with them. Re-authentication, step 3, is required after using the ATZ command
for any additional configuration changes.
4
• Operations
Sentry Global Security Modem
Installation and Operations Manual