Toshiba DEV002Z Manuel D’Utilisation

E6581295⑥ 

- 9 - 

 

 

3. Installing the DEV002Z 

Install the DeviceNet 

option

 to VF-AS1/PS1 as follows: 

* When this option is used together with the IO card option, attach this option to the front 

panel side. 
 

(1) Turn off input power of VF-AS1/PS1 and wait for at least 15 minutes and then check 

that the CHARGE lamp on VF-AS1/PS1 is no longer lit. 

(2) Securing the option to the inverter   

a) Insert a flat-blade screwdriver in each of the two holes at the upper part of the front 

panel, release the panel mounting tab by pushing the screwdriver down, and 
remove the front panel cover.   

b) Install the 

option

 in the inverter by fitting the tabs on the lower side of the 

option

 into 

the slots at the lower part of the inverter front panel.   

c) Make sure the option is securely attached to the inverter. Then, check whether the 

plastic bosses on the inverter case have fitted in the holes at the upper and lower 
parts of the 

option

.  

d) Insert the tabs at the lower part of the front cover into the slots at the lower part of 

the inverter to attach the front cover to the inverter.   

e) Stuck the enclosed "LED name label" on the option LED display part of a front 
cover.  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

a) 

b) 

c) 

d) 

e) 

LED name label 

* When installing this option to below capacities, 

remove the Add-on type option case. 

VFAS1: 200V 55, 75kW 

400V 90 - 500kW 

VFPS1: 200V 55 - 90kW 

400V 90 - 630kW