Omega Vehicle Security 1500 Manuel D’Utilisation
NetScan User’s Manual,
11-16-98
Configuring and Starting NetScan 1-1
Configuring and Starting NetScan
1
Verify Voltage Setting…… 1-2
Verify DIP Switch Settings…… 1-2
Install Signal Conditioning Card(s)…… 1-2
Connect Expansion Chassis (option)…… 1-3
Verify DIP Switch Settings…… 1-2
Install Signal Conditioning Card(s)…… 1-2
Connect Expansion Chassis (option)…… 1-3
Setup for Ethernet Operation…… 1-4
Complete Hardware Setup for Ethernet
Operation…… 1-4
Install Software/Configure Address Settings
for Ethernet Operation…… 1-5
NetScan and TCP/IP Addressing …… 1-8
Point-to Point Setup…… 1-9
Private LAN Setup …… 1-9
Private LAN Setup with Multiple Networks…… 1-10
LAN Setup with Internet Access ……1-10
Private LAN Setup …… 1-9
Private LAN Setup with Multiple Networks…… 1-10
LAN Setup with Internet Access ……1-10
Connect Channel Signal Inputs……1-10
For successful operation your computer needs to have the following:
•
10-Base-T Type Ethernet card and cables
•
Available COMM Port
•
PC system with Pentium
processor
•
Windows 3.1+, Windows 95, or Windows 98
•
At least 8 Mbytes of RAM for Windows 3.1+ (16 Mbytes recommended)
•
At leasr 16 Mbytes of Ram for Windows95/98 (32 Mbytes recommended)
Overview
This chapter explains how to configure NetScan for ethernet use. The chapter provides steps for making proper
connection to the ethernet and includes power up instructions. Note that Chapter 7, Hardware Reference, contains
detailed information pertaining to hardware issues, including setup for RS-232 and RS-422 operation.
connection to the ethernet and includes power up instructions. Note that Chapter 7, Hardware Reference, contains
detailed information pertaining to hardware issues, including setup for RS-232 and RS-422 operation.
Inspect Your System
If you have not already done so, carefully unpack your shipping carton and check all contents for damage which may
have occurred during shipment. Immediately report all damage to the shipping agent and your sales representative.
Retain all shipping materials in case the unit must be returned to the factory.
Each NetScan is shipped with the following:
have occurred during shipment. Immediately report all damage to the shipping agent and your sales representative.
Retain all shipping materials in case the unit must be returned to the factory.
Each NetScan is shipped with the following:
NetScan
Ethernet/Internet-Based Data Logging and Control Instrument
------------------
Signal Conditioning Card(s) pre-installed per customer order
1035-0901
NetScan User’s Manual
1035-0601
Programmed Disk Set, includes ChartViewNET Software
CN-18-50
DB50 Digital I/O Mating Connector
CA-1
Power Cable
CA-192-5
10-Base-T “straight through” ethernet cable, 5 ft.
CA-192-Adapter
10-Base-T “cross-over” adapter
FU-1-.5
1/2A, 250V, Slo Blo, 3AG for 105 - 125V power line or
FU-1-.25
1/4A, 250V, Slo Blo, 3AG for 210 - 250V power line