Nortel Networks R2MFC Manuel D’Utilisation

Chapter 4 Installing the R2MFC MBM 37

R2MFC Media Bay Module Installation and Configuration Guide

1 Slide the rubber boot onto the R2MFC transmit co-axial cable. See 

Figure 8   Sliding the rubber boot on to the R2MFC transmit co-axial cable

2 Connect the R2MFC co-axial cable to the correct location on the MBM. See 

.

Figure 9   R2MFC Transmit Co-axial cable connected to the MBM

3 Repeat steps 1 and 2 to attach the rubber boot to the other R2MFC co-axial cable.

Note: Rubber boots ensure that no ESD occurs on to the co-axial connectors.