Nortel Networks Option 11C Mini Manuel D’Utilisation
Page 209 of 332
Option 11C Mini
Planning and Installation Guide
228
Chapter 16 — Starting the Option 11C
Mini and installing software
Mini and installing software
This chapter describes how to start the Option 11C Mini system and to make
sure that the system is operating correctly. This chapter also describes the
Software Installation Program and how to install software in the Option 11C
Mini system. This chapter contains the following procedures:
sure that the system is operating correctly. This chapter also describes the
Software Installation Program and how to install software in the Option 11C
Mini system. This chapter contains the following procedures:
•
•
•
Starting the Option 11C Mini
Before you continue with the procedures described in this section, make sure
all necessary hardware is connected to, or installed in the system. Check all
connections, and make sure that you have installed all of the circuit cards
correctly.
all necessary hardware is connected to, or installed in the system. Check all
connections, and make sure that you have installed all of the circuit cards
correctly.
Before you start the Option 11C Mini, complete Step 1 through Step 17 in
“Chapter 6 — Installing the Option 11C Mini” on page 91.
“Chapter 6 — Installing the Option 11C Mini” on page 91.