Nortel Networks Option 11C Mini Manuel D’Utilisation
Page 94 of 332
Chapter 6 — Installing the Option 11C Mini
553-3021-209
Standard 3.00
April 2000
Refer to one of the following procedures:
To ground multiple pieces of equipment in a rack/cabinet when one or
more pieces of equipment does not have a grounding lug, see “Grounding
multiple pieces of equipment in a rack/cabinet” on page 144.
more pieces of equipment does not have a grounding lug, see “Grounding
multiple pieces of equipment in a rack/cabinet” on page 144.
10 If you require a UPS, install the UPS
according to the manufacturer’s
instructions.
11 If you have not already done so, remove the faceplate of the chassis.
a
Loosen the quick-release screws on the faceplate of the chassis. See
Figure 15.
Figure 15.
Figure 15
Faceplate on the Option 11C Mini chassis
Faceplate on the Option 11C Mini chassis
b
Lift the faceplate up.
c
Remove the faceplate.
Loosen the
quick-release
screws
quick-release
screws